|
| Following is a brief overview of the processes involved in the production of one of our resin bodies.... Firstly a primary pattern is crafted from scratch, each model is extensively researched in order to ascertain the correct dimensional and detail information. From this information detailed plans are drawn in 1/32 scale and transposed to our pattern.... a mould is made from the primary pattern using a selected grade of silicon rubber in order to perfectly reproduce the shape and detail of the pattern.... from this mould a 'slush' cast (slush casting is to pour a small amounts of resin into the mould and coat the sides with it by rotating the mold while the resin cures) of carefully selected polyurethane resin is made providing a primary casting so that detail such as grilles, panel lines and window frames can be added.... Once the detailing is completed a two-part mould is taken of this new pattern providing a basis for the casting of finished bodies for kits. |
| © Copyright – Please note that all bodies on this site are protected by copyright. Tertre Rouge Racing Cars bodies must not be copied (in whole or in part), modified, adapted or distributed without prior written consent. |
| © 2006-2009 All Rights Reserved. |
| tertre rouge racing cars, tertre rouge racing cars, tertre rouge racing cars. tertre rouge racing cars, tertre rouge racing cars, tertre rouge racing cars, tertre rouge racing cars, tertre rouge racing cars, tertre rouge racing cars, tertre rouge racing cars |
 |  |  |  |  |
 |  |  |  |  |  |